they have always been labeled as cheap or weak material
its true that MDF is just mechanically glued up saw dust
however, all materials have their good side
they are flat!
ideal for doors and draw fronts
allow me to demonstrate they prep of a MDF door
this peace was cut as a draw front
MDF surface is going to be smooth and flat
which means very little sanding before finish
as a draw front, the edges need to be sanded
getting rid of saw marks
a sanding block and 150 grid sandpaper will do
always use sanding block to keep edge straight
i like to use a trimmer to round the edges so they are all uniform
now your MDF piece is shaped and ready to start finishing
1- glue edge with glue and water solution to seal edge
2- sand glue, 150 grid sanding paper
3- repeat for stronger and less grainy board
4- 2 coats of primer, sanding required between each coat
5- 2 coats of desired color with lacquer, sanding between each coat
MDF displays true color
great medium to draw on
MDF is soft before finish
making it easy to shape
unfinished MDF piece
finished MDF piece
wood is good
even MDF
No comments:
Post a Comment